Just avoid, brittle plastic not able to withstand fitting. I am a mechanical engineer and am very particular that components should be torqued correctly on bikes. This item didn’t not feel as good as the Nukeproof UDH I was hoping to replace. This proved to be correct because it did not reach anywhere near the 25Nm torque specified on other UDH. The threaded boss snapped off at its base. As a trial I put the old damaged Nukeproof hanger back into the frame to see how much torque it could handle, I was not able to break the plastic or strip the threads, far superior quality

Sorry aber eine Legierung ist das nicht, und wenn dann eine ganz schlechte.Habe das Schaltauge wie für mein MTB mit dem Drehmomentschlüssel versucht auf 25nm anzuziehen, da brach es einfach auseinander - Rücksendung und das Originale von SRRAM gekauft. Da gabs keine Probleme mit den 25nm!Klarer Fall von Finger weg, wenn Ihr 25nm braucht!

zero stars, imploded on installation with a metal fatigue crack. Yes using a torque wrench to correct specification.

I got this hanger as a spare for my updated On One Hello Dave bike as it has a UDH Hanger - I have compared it with the original one that is fitted and it its identical. The material and quality of manufacture looks excellent, I’m sure it will perform exactly the same as the original one.

This is a nicely made adapter to convert a bicycle UDH (universal derailleur hanger) to be able to use a non-UDH / Standard rear Mech / rear derailleur that uses a normal hanger. As such its pretty niche part, becuase if you have a UDH frame you likely have a UDH Mech, but it is well made and for £12 (Oct '24)the value is ok, and if you need it you need it - for example if you get a new frame with UDH but are re-sing your existing normal hanger rear mech.The lock cap is a reverse thread, and the direction of tightenting is clearly marked on it with arrows as it the torque.The main boddy and caps and aluminium alloy, and then this has a plastic cover/protector over it to protect the frame paint.