Tavolo da lavoro a nido d'ape 500x500mm Tavolo da taglio a nido d'ape per incisore laser a nido d'ape per taglio laser e incisione (con piastra in alluminio)

An absolute necessity for any laser. Pins are cheap, & magnets can be used. It came flat, too.

Recently picked up a 40w Creality Falcon 2 Pro and was not happy with the slat system they provide for a work bed. This honeycomb bed fits nicely in the Falcon and is much easier to deal with. The bed is well made and reasonably priced. I use the existing slats but in the vertical position. This does lose you some height. You could remove the slats and space this off of the bottom if you really need more height. Also note that you do lose a bit of X/Y space since the bed is a bit smaller than the max working area of the Falcon. If I ever have need for the space, its not a big deal to remove and go back to the slat system.

Einfach perfekt! Ich bin so froh, dass ich mir gleich das große Teil gegönnt habe, diese passt super zu meinem Gerät, damit macht das Lasern gleich noch mehr Freude.Ich vermute das die Originalplatte zu meinem Laser dasselbe in Grün ist, nur in teurer.

L'article est parfait hormis un gros défaut d'anodisation sur un côté. Une bande couleur acier d'un centimétre de large non anodisé noir. A part ce point décevant c'est une table nid d'abeille parfaite tant en taille que pour le matériaux.

This size is 50x50 is perfect for gantry style laser cutters as the numerous 40x40 versions on the market have smaller exposed honeycomb bed due to the frame.