Carrello

è vuoto

è vuoto
Disponibile

Fender HiMass - Ponte per basso a 4 corde, con selle in zinco, cromato

Spedizione gratuita per ordini superiori a 25,99€
65,47€ -51%

31,99€

Informazioni su questo articolo

  • Ponte basso HiMass
  • Spaziatura tra le corde
  • Selle in zinco
  • Montaggio a 4 viti
  • Garanzia inclusa


Aggiungi sustain, risonanza e attacco migliorato senza alterare significativamente il tono quando aggiungi questo ponte HiMass prodotto con precisione al tuo basso a 4 corde. Le selle in zinco conferiscono un tono spesso e rotondo mentre la spaziatura delle corde da 0,75 pollici ti assicura molto spazio per le dita volanti. Realizzato con precisione come sostituto diretto per modelli Fender in stile vintage; questo ponte si monta tramite quattro viti. Materiale di montaggio non incluso.


A.B.
Recensito negli Stati Uniti il 17 marzo 2025
Awesome bridge, easy to install on my Squire Jazz bass. More sustain, and solid sound.
Randy Pirie
Recensito in Canada il 4 aprile 2025
This fits any Fender P bass or Jazz bass perfectly. If it has five screws and five holes you just line it up over the holes and re use your screws because it doesn't come with screws. You will have to set your bridge height and intonation but after that you have massive sustain and it is solid.
たんたんにゃ
Recensito in Giappone il 17 settembre 2024
JB62にポン付け、サウンド奥の輪郭が出て、ボディバランスも改善されて一石二鳥!Fenderの方、高額なバダスよりおすすめです。
Andrew Braybrook
Recensito nel Regno Unito il 19 febbraio 2023
I have a `76 Fender Jazz bass and the bridge was looking a little tired. If I were using the bridge and pickup cover it wouldn`t matter, but I don`t use it as it restricts where you can play the strings. This bridge is much more solid and built to be seen. The screw holes are in exactly the right place, it`s a straight swap-in. There are no screws supplied so you have to use the 5 on the bass.The only issue was that after the swap, the action was maybe 3 or 4 mm higher at the 21st fret, which is way too high. Even with all the grub screw adjustment at the lowest, the saddles are way too high. Two options are possible: you could try to put a shim in the neck joint to alter the angle of the neck, or you have to file the saddle grooves down, in my case, a lot. I bought a set of luthier`s files and used the round ones to take the saddles down, maybe 4mm off the E saddle, maybe 2mm off the G saddle. Don`t do it all at once, take some metal off, refit and try it, bit more off, try it again. It's OK to take a bit more metal off than is necessary as you can then use the grub screws to raise the saddle a bit.Setting up the intonation is by using a cross-head screwdriver to adjust the saddle position back or forwards while checking the open and 12th fret tuning are both in tune. Do this for each string. I can`t get my head round why that is in different positions for each string, but it usually is!The look of the bass is much-improved and modernised. This bridge is sturdy and designed to be seen. A worthwhile upgrade, wish I`d thought of doing it sooner. You may well need those Luthier`s files, so have another tenner ready.
JC
Recensito in Spagna il 13 maggio 2022
No se puede ajustar una acción baja para tus cuerdas, es extremadamente alta. En mi opinión no recomiendo comprarlo.

Potrebbe piacerti anche